Top 20 Quick Ship Specials Trade Show Tips Photos My Gallery (0)

LED Flex Tape

Led Light Tape Power Supplies & Controllers
Led Light Tape Power Supplies & Controllers

Purchase

Request Price
  • LED Flex Tape

  • Ultra Bright Surface—Mount LEDs
  • Highly Flexible Circuit Board with Integral 3M© Hi-Bond Adhesive Tape That Can Be Applied to Most Accessible Surfaces
  • 12" Modular Plug-in Strips to Make Multi-foot Runs to Power Supplies and Interconnections
  • Low Power Consumption, Low Heat, Low Voltage
  • Stable Voltage and State of the Art LED Driver Technology Ensures Consistent Illumination Levels
  • Smooth 120° Light Distribution
  • Long Life LEDs — 50,000 to 100,000 Hours: UL and ETL Listed
  • Dry Location Only (Consult Factory for Wet Location Application)

  • Light Tape Available in the Following Color Temperatures and Colors:

  • 3K–Warm White, Regular Output – 1.4 Watts per Foot
  • 3K HO–Warm White, High Output – 3 Watts per Foot

  • 4K–Neutral White, Regular Output – 1.4 Watts per Foot
  • 4K HO–Neutral White, High Output – 3 Watts per Foot

  • 6K–Cool White, Regular Output – 1.4 Watts per Foot
  • 6K HO–Cool White, High Output – 3 Watts per Foot

  • Red–Red Light Only, 0.9 Watts per Foot
  • Green–Green Light Only, 1.4 Watts per Foot
  • Blue–Blue Light Only, 1.4 Watts per Foot
  • Yellow–Yellow Light Only, 0.9 Watts per Foot

  • RGB–Red, Green & Blue Color Changing – 3.2 Watts per Foot

  • Power Supplies & Controllers based on LED Tape Product & Length of Runs

  • Please Contact for Creation of a Complete Bill of Materials Needed for your Installation Project

What does it mean for a product to be LISTED to UL standards?

A product that has the listing mark of UL, ETL or CSA means that the entire product and all of its components have been tested as they are used in connection with one another. This means that the entire product meets the applicable UL standard -- not just one or some of the components (like the power supply or electrical cord).

Led Light Tape Power Supplies & ControllersTesting is completely documented in a testing report. The components used are listed in the report and are essentially registered for the applicable product. Assembly factories are subject to unannounced inspections to assure ongoing compliance with the testing reports.

What is the difference between the ETL, CSA and UL Marks?

Each is a separate testing organization, and certification marks –ETL, CSA or UL Listed Mark –- demonstrate compliance to widely accepted product safety standards. All three are recognized as NRTLs in the U.S. and, in a similar capacity, as a testing organization and certifying body in Canada by the Standards Council of Canada. Interestingly, Canada has legislation requiring products being sold to be listed to the UL standards.

Why do some products have the ETL or CSA marks and others have the UL Mark?

All three organizations test to the exact same standard. One of the key decisions in choosing whom to use is that testing through ETL or CSA for potential listing tends to be faster than UL's timeframe. Quite simply, the quicker one can complete testing, the sooner they can bring a recognized and listed product to market.

Why should I really care if a product is listed with UL, ETL or CSA?

Using products that are proven to be safe when used as intended would be important not just for the safety of our own customers, but for the safety of all of those participating in an event. Secondly, comes the concern of liability. If damage occurs from the use of a product that is not listed with UL, ETL or CSA, there is a significantly higher degree of negligence and potential liability.

12V Plug-and-Play Power Supply

See Price Table
  • 12V Plug-and-Play Power Supply

  • 120V/12VAC
  • Includes AC Wall Plug and Female Power Output Plug for Easy Installation
  • Available in 24W, 36W and 60W
LED Flex Tape

Documentation for LED Flex Tape

Frequently Asked Questions

  1. What if I have a question and want assistance with designing a lighting setup for a project?

    Give us a call or send us an email with the details of your project and a description of the lighting effects you desire - using Contact Us located on every Product Detail page. We will respond promptly.

  2. What should be considered when selecting the type of lighting to use in a space?

     

    The type(s) of lamp that you select depends on the effect that you want to deliver. Color temperature, or chromaticity, influences the mood of the space you are lighting. It is measured by “Kelvin Range” or “Temperature” and is sometimes called Color Rendering Index (“CRI”).   
     
    To understand color temperature, think of a flame from a butane torch. The red/orange outer flame is the color generated at a certain temperature. The next hottest layer is the white portion of the flame. The hottest section of the fame is blue.
     
    The best bet is to discuss the project with us, and we can then guide you in the selection process.

     

  3. What is the influence of color temperature on mood?

    The following are general accepted guidelines:

    • Kelvin Range 3000K – Friendly, Intimate, Personal
    • Kelvin Range 3500K – Friendly Inviting, Non-threatening
    • Kelvin Range 4100K – Neat Clean, Efficient
    • Kelvin Range 5000K+ – Bright, Alert, Exacting

    Give us a call or send us an email if you have any questions about the appropriate lighting for your exhibit.

     

  4. How versatile is Track Lighting?

     

    It is an extremely versatile lighting system.
     
    The individual track heads can be positioned anywhere along the track, be swiveled or rotated while in a given position, and then aimed in any direction.
     
    This provides excellent versatility to change your lighting scheme whenever the need arises. 

     

  5. Can LEDs be used to provide general illumination?

     Yes they can! As with any newer technology, please be prepared for a higher price point when using LED technology.

     

  6. What are some of the advantages of using LED bulbs compared to incandescent bulbs

     LED light bulbs use less energy and throw off less heat than their incandescent counterparts.

     LED light bulbs are also available in a variety of color temperatures ranging from warm white to neutral white to cool white.
     
    We have more LED lights available than shown online. Give us a call or send us an email.

     

  7. Why do you only sell Velcro brand hook and loop tapes and products?

    The answer is quality!

     
    In our experience the high quality adhesives and manufacturing process used by Velcro® stand up best to the ranges of temperature and humidity that shipments are exposed to over the road and in marshaling yards. 
     
    Using Velcro® brand products assures that the products will work as intended when unloaded from a trailer and installed in a trade show or retail venue.

     

  8. What are some general safety guidelines that should be kept in mind when choosing bulbs and power sources for lighting fixtures?

    Using products that are either UL or ETL listed eliminates most every question. These symbols mean that the manufacturers produce products according to widely accepted UL safety standards. 

     
    Products that are UL or ETL approved are subject to quarterly unannounced inspections at the manufacturing sites to assure that safety matters and manufacturing processes are being adhered to. 
     
    We have a broad selection of replacement bulbs than those shown online. Give us a call or send us an email for more information.

     

Lead Time

The lead time for the LED Flex Tape is 10 Business Days - Click for Details.

  • Suggested lead times may vary depending on current orders. Please check with Customer Service.
  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Standard lead times do not apply to orders of multiple quantities.

Exhibit Weight

Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.

Electrical/Cord Management

Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.

Add designs and photos to your personal gallery simply by clicking on the +My Gallery links

Then email your "My Gallery" to colleagues, friends, or your favorite exhibit designer. There's no better way to begin designing a display that reflects your exhibit marketing goals.

Note: My Gallery uses a temporary browser cookie to store your gallery. We recommend that you send your gallery to your email address if you need to retain it for longer than 30 days.

  • Suggested lead times may vary depending on current orders. Please check with Customer Service.
  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Standard lead times do not apply to orders of multiple quantities.
Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.
Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.